- DAQCard E Series User Manual Multifunction I/O Cards for PCMCIA

Appendix A Speciﬁcations for DAQCard-AI-16XE-50

DAQCard E Series User Manual A-12



National Instruments Corporation

DMA modes...................................... Single transfer, demand transfer

Triggers

Digital Trigger

Compatibility .................................... TTL

Response........................................... Rising or falling edge

Pulse width........................................ 10 ns min

Power Requirement

+5 VDC (±5%).................................. 230 mA active,

90 mA standby

Power available at I/O connector....... +4.65 to +5.25 VDC

at 250 mA

Note: You can save current by using the NI-DAQ power down utility when your

DAQCard is not in use.

Physical

PC Card type..................................... Type II

I/O connector .................................... PCMCIA 68-position female

connector

Environment

Operating temperature....................... 0° to 55° C

Storage temperature........................... -55° to 150° C

Relative humidity.............................. 5% to 90% noncondensing