User's Manual

Glossary
DAQCard-1200 User Manual G-6 ni.com
L
LED light-emitting diode
LSB least significant bit
M
MAX Measurement and Automation Explorer—National Instruments software
that allows you to interface with and configure NI devices
MB megabytes of memory
MSB mostsignificantbit
N
NC not connected (signal)
NI National Instruments
NI-DAQ National Instruments driver software for DAQ hardware
NRSE nonreferenced single-ended mode—all measurements are made with
respect to a common (NRSE) measurement system reference, but the
voltage at this reference can vary with respect to the measurement system
ground
O
OBF Output Buffer Full—a low singal on this handshaking line indicates that
data has been written from the specified port
OUT output signal