Network Card User Manual

Maximum output current

Per channel ................................. 1 A

Across all channels..................... 4 A

Output impedance............................. 0.12 Ω

Output bandwidth ............................. 16 kHz for a current flow

≥3.2 mA

Maximum off-state

leakage current.................................. 50 µA

Physical Characteristics

Indicators .......................................... Green POWER and

READY indicators, 16 green

input/output state indicators

Weight

FP-CTR-502 ............................... 143 g (5.0 oz)

cFP-CTR-502 ............................. 113 g (4.0 oz)

Power Requirements

Power from network module ............800 mW

Isolation Voltage

Channel-to-channel isolation............ No isolation between

channels

Transient overvoltage........................ 2,300 V

rms

Environmental

FieldPoint modules are intended for indoor use only. For outdoor

use, they must be mounted inside a sealed enclosure.

Operating temperature

cFP-CTR-502 ............................. –40 to 60 °C

FP-CTR-502 ............................... –40 to 70 °C

Storage temperature .......................... –55 to 85 °C

Humidity ........................................... 10 to 90% RH,

noncondensing

Maximum altitude............................. 2,000 m; at higher altitudes

the isolation voltage ratings

must be lowered

Pollution Degree ............................... 2