NI MATRIXx Reference Manual

Chapter 4 Generating Code for Real-Time Operating Systems
© National Instruments Corporation 4-7 AutoCode Reference
Startup Procedure SuperBlock Table
Table 4-6 consists of configuration information for all startup procedure
SuperBlocks in the model. Each row is identified by the name of the
SuperBlock. The table is named
stupsupblk. Example 4-6 shows a
startup table.
Example 4-6 Startup Table Example
rtos.stupsupblk =
Startup | Processor Ordering
-----------------------------------------
pre_initialize | 1 1
var_update | 1 2
io_init | 2 1
ipc_init | 2 2
Processor IP Name Table
Table 4-7 consists of configuration information, assigning each processor
an IP name. Each row is identified by the processor number. The table is
named
IPprsrmap. Example 4-7 shows a processor IP table.
Table 4-6. Startup Table Contents
Column
Name
Data
Type
Template Parameter
Containing the Data
Default Value
Processor Integer
proc_processor_map_li[]
Round-robin
(a sequential, cyclical allocation of
resources to the startup procedure
SuperBlocks)
Ordering Integer
proc_ordering_li[]
n + 1
Table 4-7. Processor IP Table Contents
Column
Name
Data
Type
Template Parameter
Containing the Data
Default Value
IP Number String
prsr_ip_name_ls[]
127.0.0.1