Network Card User Manual

Chapter 3 Hardware Overview
© National Instruments Corporation 3-19 AT E Series User Manual
Figure 3-14.
CONVERT* Signal Routing
This figure shows that CONVERT* can be generated from a number of
sources, including the external signals RTSI<0..6> and PFI<0..9> and the
internal signals Sample Interval Counter TC and GPCTR0_OUT.
Many of these timing signals are also available as outputs on the RTSI pins,
as indicated in the RTSI Triggers section later in this chapter, and on the PFI
pins, as indicated in Chapter 4, Connecting Signals.
RTSI Trigger<0..6>
PFI<0..9>
CONVERT*
Sample Interval Counter TC
GPCTR0_OUT