Network Card User Manual

Index
AT E Series User Manual I-14 ni.com
triggers
analog, 3-14
block diagram, 3-15
RTSI triggers, 3-20
specifications
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3
analog trigger, A-9
digital trigger, A-9
RTSI, A-10
AT-MIO-16E-10 and
AT-MIO-16DE-10
digital trigger, A-18
RTSI, A-18
AT-MIO-16XE-10 and
AT-AI-16XE-10
analog trigger, A-27
digital trigger, A-27
RTSI, A-27
AT-MIO-16XE-50
digital trigger, A-36
RTSI, A-36
troubleshooting resources, D-1
troubleshooting. See questions about
AT E series boards
U
UISOURCE signal, 4-44
unipolar input
AT-MIO-16E-1, AT-MIO-16E-2,
AT-MIO-64E-3, AT-MIO-16E-10, and
AT-MIO-16DE-10, 3-7
AT-MIO-16XE-10, AT-AI-16XE-10, and
AT-MIO-16XE-50, 3-8
mixing bipolar and unipolar channels
(note), 3-9
unipolar output, 3-13
unpacking AT E series boards, 1-6
UPDATE* signal timing connections, 4-42
V
VCC signal
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3 (table), 4-8
AT-MIO-16E-10 and AT-MIO-16DE-10
(table), 4-10
AT-MIO-16XE-10 and AT-AI-16XE-10
(table), 4-12
AT-MIO-16XE-50 (table), 4-14
voltage output
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3, A-7
AT-MIO-16E-10 and AT-MIO-16DE-10,
A-15
AT-MIO-16XE-10, A-25
AT-MIO-16XE-50, A-34
W
waveform generation timing connections
UISOURCE signal, 4-44
UPDATE* signal, 4-42
WFTRIG signal, 4-41
Web
professional services, D-1
technical support, D-1
WFTRIG signal timing connections, 4-41
wiring considerations, 4-55
worldwide technical support, D-1
WR* signal (table), 4-51