Network Card User Manual

Index
AT E Series User Manual I-4 ni.com
AT-MIO-16E-10 and AT-MIO-16DE-10
(table), 4-10
AT-MIO-16XE-10 and AT-AI-16XE-10
(table), 4-12
AT-MIO-16XE-50 (table), 4-13
description (table), 4-5
DAC1OUT signal
analog output connections, 4-27
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3 (table), 4-8
AT-MIO-16E-10 and AT-MIO-16DE-10
(table), 4-10
AT-MIO-16XE-10 and AT-AI-16XE-10
(table), 4-12
AT-MIO-16XE-50 (table), 4-13
description (table), 4-5
DAQ-STC, C-1
data acquisition timing connections
AIGATE signal, 4-39
CONVERT* signal, 4-38
EXTSTROBE* signal, 4-41
SCANCLK signal, 4-40
SISOURCE signal, 4-39
STARTSCAN signal, 4-36
TRIG1 signal, 4-33
TRIG2 signal, 4-34
DATA signal (table), 4-51
DGND signal
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3 (table), 4-8
AT-MIO-16E-10 and AT-MIO-16DE-10
(table), 4-10
AT-MIO-16XE-10 and AT-AI-16XE-10
(table), 4-12
AT-MIO-16XE-50 (table), 4-13
description (table), 4-5
digital I/O connections, 4-28
digital timing connections, 4-30
diagnostic resources, D-1
DIFF (differential) input mode
definition (table), 3-7
description, 4-20
ground-referenced signal sources, 4-21
nonreferenced or floating signal
sources, 4-22
single-ended connections, 4-24
floating signal sources (RSE), 4-25
grounded signal sources
(NRSE), 4-25
when to use, 4-20
digital I/O
common questions about, C-7
operation, 3-18
signal connections, 4-28
specifications
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3, A-8
AT-MIO-16E-10 and
AT-MIO-16DE-10, A-16
AT-MIO-16XE-10 and
AT-AI-16XE-10, A-25
AT-MIO-16XE-50, A-34
digital ports A, B, and C timing specifications
mode 1 input timing, 4-52
mode 1 output timing, 4-53
mode 2 bidirectional timing, 4-54
Port C signal assignments (table), 4-50
timing signals (table), 4-51
digital trigger specifications
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3, A-9
AT-MIO-16E-10 and AT-MIO-16DE-10,
A-18
AT-MIO-16XE-10 and AT-AI-16XE-10,
A-27
AT-MIO-16XE-50, A-36
DIO<0..7> signal
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3 (table), 4-8
AT-MIO-16E-10 and AT-MIO-16DE-10
(table), 4-10