User manual

4
1.2 VirtualBench Specifications
Note: Find detailed specifications in the specification document. Refer to this document for triggering options, USB and wireless
connectivity, calibration information, and operation/safety requirements. Specifications are valid following 30 minutes of warm-
up and for a typical temperature of 25 °C unless otherwise noted.
The following sections offer a quick overview of the hardware specifications for the various VirtualBench instruments.
1.2.1 Mixed-Signal Oscilloscope
Figure 1.2. Mixed-Signal Oscilloscope
● Analog Channels: 2
● Bandwidth: 100 MHz
● Maximum Sampling rate: 1 GS/s for 1 channel and 500 MS/s per channel
● Digital Channels: 34
● Measurements
o Oscilloscope Time: Period, frequency, positive duty cycle, negative duty cycle, positive pulse width,
negative pulse width, rise time, fall time, rise rate, fall rate
o Oscilloscope Voltage: High, low, amplitude, maximum, minimum, peak-to-peak, overshoot, undershoot,
RMS, mean, cycle RMS, cycle mean
o Logic Analyzer Time: Period, frequency, positive duty cycle, negative duty cycle, positive pulse width,
negative pulse width
o Math: A+B, A-B, A*B, FFT