Datasheet

Digital I/O
Number of channels
8
Direction control Input or output, software-selectable
Logic level 5 V compatible TTL input,
3.3 V LVTTL output
Drive strength 4 mA
Input voltage 0 V to 5 V
Note Digital I/O lines are designed to withstand accidental overvoltage from
signals on the VB-8012 or similar devices. They are not recommended for use with
signals likely to exceed 0 V to 5 V in normal operation.
DIO channel pull resistors 10 kΩ, pull-down on dig/<0..7>,
10 kΩ, configurable pull-up to 3.3 V on
dig/<6,7>
External Power
3.3 V output
Voltage 3.3 V ±10%
Current 20 mA
Digital Multimeter
Functions
DC voltage, AC voltage, DC current,
AC current, resistance, diode, continuity
12
Resolution 5½ digits
Sample rate 5 S/s
Caution Do not use this device for connection to signals or for measurements
within Measurement Categories III or IV. For more information about Measurement
Categories, refer to the Safety Voltages section.
Input protection
Resistance, diode Up to 300 V DC
DC and AC voltage Up to 300 V DC or 265 V AC
rms
,
400 V AC peak
12
Continuity is only available in the VirtualBench application.
6 | ni.com | NI VirtualBench VB-8012 Specifications