Datasheet

Wireless Interface
Table 8. Network Protocols and Ports Used
Port Protocol Function
Port 80/TCP HTTP Device configuration (web, MAX)
Port 443/TCP HTTP Device configuration (web, MAX)
Port 3580/TCP Service locator Device configuration (web, MAX)
Port 9090/TCP Configuration only VirtualBench instrument protocol
Port 5353/UDP Multicast DNS Device discovery
Network IP configuration IPv4, DHCP Client/Server
Radio mode IEEE 802.11 b,g,n
Wireless modes AP mode (default), client mode
Frequency band 2.4 GHz ISM
Channel width 20 MHz
Channels USA 1-11, International 1-13
(12 and 13 client mode only)
TX power +10 dBm maximum (10 mW)
Security Open, WPA, WPA2, WPA2-Enterprise
Enterprise security EAP types EAP-TLS, EAP-TTLS/MS-CHAPv2,
PEAPv0/MS-CHAPv2
Antenna External RP-SMA omnidirectional dipole
Power Requirements
Caution The protection provided by the VirtualBench hardware can be impaired if
it is used in a manner not described in the NI VB-8012 Safety, Environmental, and
Regulatory Information document.
Voltage input range 100 VAC to 240 VAC, 50/60 Hz
Power consumption 100 W maximum
12 | ni.com | NI VirtualBench VB-8012 Specifications