7340 PCI User Manual

Appendix A Specifications
© National Instruments Corporation A-3 NI 7340 User Manual
Voltage range.................................. 0 to 5 V
Output low voltage .................. <0.6 V at 64 mA sink
Output high voltage ................. Open collector with built-in
3.3 kΩ pull-up to +5 V
Polarity............................................ Programmable, active-high
or active-low
System Safety
Watchdog timer function ....................... Resets board to startup state
Watchdog timeout........................... 63 ms
Shutdown input
Voltage range.................................. 0 to 5 V
Input low voltage ..................... 0.8 V
Input high voltage .................... 2 V
Polarity..................................... Rising edge
Control ............................................ Disable all axes and
command outputs
Motion I/O
Encoder inputs........................................ Quadrature, incremental,
single-ended
Maximum count rate....................... 20 MHz
Minimum pulse width..................... Programmable; depends
on digital filter settings
Voltage range.................................. 0 to 5 V
Input low voltage ..................... 0.8 V
Input high voltage .................... 2 V
Minimum index pulse width ........... Programmable; depends
on digital filter settings
Forward, reverse, and home inputs
Number of inputs ............................ 12 (3 per axis)
Voltage range.................................. 0 to 5 V
Input low voltage ..................... 0.8 V
Input high voltage .................... 2 V
Polarity............................................ Programmable, active-high
or active-low