Welding System User Manual

Appendix B Analog Input Channel, Gain Settings, and Voltage Calculation
NI-DAQ FRM for PC Compatibles B-2
© National Instruments Corporation
Valid Internal Analog Input Channels
Table B-2 lists the valid internal channels for analog input devices.
DAQPad-MIO-16XE-50 0–15 and ND_CJ_TEMP
†
0–7 and ND_CJ_TEMP
†
PCI-6110E
PCI-6111E
N/A
N/A
0–3
0–1
PXI MIO and AI devices
ND_PXI_SC
N/A
PCI-4451
PCI-4551
N/A
0–1
PCI-4452
PCI-4552
N/A 0–3
†
ND_CJ_TEMP
,
ND_PXI_SC
,
and
ND_VXI_SC
are constants that are defined in the following header files:
• C programmers—
NIDAQCNS.H
(
DATAACQ.H
for LabWindows/CVI)
• BASIC programmers—
NIDAQCNS.INC
(Visual Basic for Windows programmers should refer to the
Programming
Language Considerations
section in Chapter 1,
Using the NI-DAQ Functions,
for more information.)
• Pascal programmers—
NIDAQCNS.PAS
Table B-2.
Valid Internal Analog Input Channels
Device Internal Channels
AT-MIO-16XE-10
AT-MIO-16XE-50
NEC-MIO-16XE-50
DAQPad-MIO-16XE-50
ND_INT_AI_GND
ND_INT_REF_5V
ND_INT_AO_GND_VS_AI_GND
ND_INT_AO_CH_0
ND_INT_CH_0_VS_REF_5V
ND_INT_AO_CH_1
ND_INT_AO_CH_1_VS_REF_5V
DAQCard-AI-16E-4
NEC-AI-16E-4
ND_INT_AI_GND
ND_INT_REF_5V
ND_INT_CM_REF_5V
ND_INT_AO_GND_VS_AI_GND
Table B-1.
Valid Analog Input Channel Settings (Continued)
Device
Settings
Single-ended
Configuration
Differential
Configuration