Network Card User Manual

Chapter 2 Installation and Verification
PCI Serial for Windows Me/9x 2-2 ni.com
3. Click on the Install button.
4. When prompted, insert the NI-Serial Software for Windows
2000/NT/Me/9x CD, and click on the Next button.
5. When prompted, click on the Finish button to install the program files
from floppy disks or CD-ROM.
6. The setup wizard begins with the screen shown in Figure 2-2.
Figure 2-2. NI-Serial Setup Screen
The setup wizard guides you through the necessary steps to install the
NI-Serial software. To exit the setup wizard at any time, click on the
Cancel
button.
7. If you need to install your hardware, or if this is your first time to install
the NI-Serial software for Windows Me/9
x
, skip to the next section,
Install the Hardware
. Otherwise, continue to step 8.
8. If your hardware is already installed, restart Windows Me/9
x
.
9. Windows Me/9
x
should automatically detect your hardware and
display one or more
New Hardware Found
dialog boxes. Your
operating system (Windows Me/9
x
) may show the
Windows Default
Driver
option. If so, make sure the
Windows Default Driver
is
selected and click on the
OK
button. If the
Windows Default Driver
option is not shown, the installation continues automatically. When
you finish, continue to the
Verify the Installation
section.