User's Manual

National Electronics & Watch Co, Ltd.
Important reminder:
 Before use of the Smart Gear device, you may delete device data through the ff. steps:
• Go to MENU screen on your smart phone and tap RECORD highlighted in red as shown.
• Tap “Clear all device’s data” and “Clear all my data” on the Smartphone.
• Tap “Yes” to confirm.
Knowing the Bluetooth Smart Gear device
Pushing the device buttons will cycle the displays as shown:
• Press S1 button to scroll the different modes; TIME, WEEKDAY/MONTH/DATE,
CALORIE, STEP, WEATHER/TEMP, PHONE, MESSAGE, FIND ME and the screen icons.
 If no Bluetooth connection, only TIME, WEEKDAY/MONTH/DATE, CALORIE, STEP will
appear in the device.
 The Weather/Temperature displayed on the Smart Gear device is from the Smartphone
thru Bluetooth connection.
• Press S2 button to scroll the different modes; SLEEP, EXERCISE, DATA and SET mode.
PHONE and MESSAGE (upcoming features)
This portion is an on-going App revision:
¾ Shows Caller ID and Messages.
¾ When receive an incoming call or message, the motor vibrates.
¾ I f no phone call or message data, it will display “NO DATA”.
¾ Maximum of 20 data files (20 calls & 20 messages) can be saved in memory. When
memory is full, Memory is managed in “First in- First out” basis. The Oldest file will be
automatically deleted and replaced by the newest file.
• Press and hold S2 button to enter phone data or message data.
• Press S1 button to view the data. The phone icon or message icon is shown with the date,
day, time and among others.
• Press and hold S2 button to exit and it will automatically return to Time mode.