User's Manual

7
2 Install the USB Adapter
The IEEE802.11b USB WLAN driver and utility are included on the accompanying
installation CD. Please follow the installation procedures in Section 3.1. (Your USB Adapter
will not work properly if the driver and utilities are not installed correctly.)
1. After completing the software installation, please insert the USB Adapter and then the setup will
automatically start.
If you’re asked to insert a “ Windows 98 CD-ROM “ during the installation, insert your
“ Windows 98 CD-ROM “ and click “ Yes “. Once the setup task is completed, the “ Microsoft
Internet Explorer “ should start up. Please close it.
2. When the USB Adapter setup task is completed, you can start the IEEE 802.11b USB WLAN
Utility. To start the utility, please refer to the chapter 3.3 “ IEEE 802.11b USB WLAN Utility“.
Additional Note for Windows 2000
If you install the IEEE802.11b USB Wireless LAN under Windows 2000, it will be a little bit
different from Windows 98 or Me. A message will be prompted as follows, clickYes to
complete the USB adapter setup.