User's Manual

Step by step Installation Guide

This section will lead you through the installation of USB Adapter and IEEE802.11b USB WLAN

software in through details. You may wish to skip to quick start guide to wireless networking.

To establish your wireless network connection, the following steps should be executed.

1. Install the software using the installation CD.

2. Install the USB Wireless LAN Adapter.

3. Install the required network protocols to communicate with your network. Most likely, you will

need the TCP / IP protocol.

The product is designed to operate in Windows 98, Windows Me, and Windows 2000. And the

installation procedure is about the same. Please follow up the installation wizard that provided by

your system to install the software. The example here is based on the Windows 98SE.