User Manual

Quick Installation and Operation Guide
1. Exit all application programs and shut the computer down.
2. Insert the adapter in the CardBus slot.
See chapter 3 of this user’s guide for detailed instructions.
3. If the computer requires an external disk drive to access floppy disks, connect the drive.
4. Turn on the computer.
5. Install a driver from the Wireless Adapter Driver disk.
Follow the instructions on the screen and in chapter 4 of this user’s guide.
6. Remove the Wireless Adapter Driver disk and insert the Wireless Adapter Utility disk.
7. Install the Wireless Adapter Utility.
Open the
Start
menu, choose
Run
, type “a:\setup” (without quotation marks), press
Enter
,
and follow the instructions on the screen and in
chapter
5 of this user’s guide.
8. Create and apply a connection profile for a wireless network.
See chapter 6 of this user’s guide for detailed instructions.