User's Manual

2.3 Install the PCMCIA card

The IEEE802.11b WLAN driver and utilities are included on the

accompanying installation CD. Please follow the installation procedures in

Section 2.2. (Your PCMCIA card will not work properly if the driver and

utilities are not installed correctly.)

Make sure that there is an empty PCMCIA slot for IEEE802.11b WLAN PC

card. Install the IEEE802.11b WLAN Utility/Driver first before inserting the

PCMCIA card.

1. Insert the PCMCIA Card and then the system will automatically start.

If you’ re asked to insert a “ Windows 98 CD-ROM “ during the installation,

insert your “ Windows 98 CD-ROM “ and click “ Yes “ . Once the setup

task is completed, the “ Microsoft Internet Explorer “ should start up. Please

close it.

2. When the PCMCIA card setup task is completed, you can start up the IEEE

802.11b WLAN Utility. To start up the utility, please refer to the chapter 2.4

“ Utility Start up Configuration “ .

CAUTION STATEMENT

FCC Raditation Exposure Satement:

This equipement complies with FCC radiation exposure limits set forth for an

uncontrolled environment.

This equipment should be installed and operated with minimum distance 5cm

between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.