User's Manual

10 InstantWave High Speed Access Point
The Access Point is now ready to communicate with the wireless stations using its
factory default settings. Refer to the InstantWave High Speed PCI/PC Card User
Guide for card setup instructions.
LED Indicators
The Access Point LEDs show the status of the connections. Figure 6 shows the
LEDs, and
StatusPower
LAN
Tx
Rx
LinkLink
Radio
TxRx
Green
Orange
Figure 6. Access Point LEDs
The Access Point LEDs show the status of the connections.
General Color Function
Power Green
Unlighted: Power OFF
LED blinking: Diagnostic test
LED steady ON: Healthful condition
Status Red
LED steady ON: sick condition
LED steady OFF: Normal working
Radio Color Function
Active Green Indicates wireless data active
Link Orange Indicates a wireless link. If the radio
fails, this LED will be OFF.
Ethernet Color Function
Active Green Indicates Ethernet data active
Link Orange Indicates a Ethernet link. If the
Ethernet fails, this LED will be OFF.
Figure 7. LED Functions