User's Manual

10 InstantWave High Speed Access Point For Small Business
LED Indicators
The Access Point LEDs show the status of the connections. Figure 6 shows the
LEDs, and
Figure 6. Access Point LEDs
The Access Point LEDs show the status of the connections.
General Color Function
Power Green
Unlighted: Power OFF
LED blinking: Diagnostic test
LED steady ON: Healthful condition
Status Red
LED steady ON: sick condition
LED steady OFF: Normal working
Radio Color Function
Active Green Indicates wireless data active
Link Orange Indicates a wireless link. If the radio
fails, this LED will be OFF.
Ethernet Color Function
Active Green Indicates Ethernet data active
Link Orange Indicates a Ethernet link. If the
Ethernet fails, this LED will be OFF.
Figure 7. LED Functions
AP Management Software Installation / Uninstallation
Installation
step1. Insert the first InstantWave High Speed setup disk into drive A:
LNK
E/N
RF
E/N
PWR
LNK TX/RX
RF
TX/RX