User's Manual

20
Instant
Wave High Speed
PCI/PC Card
Installation Problems
Windows NT 4.0 could not find the adapter
• The adapter is not properly inserted in the slot
1. Power off the computer
2. Remove and reinsert the wireless adapter
3. Reboot the computer and re-install the adapter driver
• A previous adapter installation was aborted by the user, or by Windows NT
4.0
1. Look in Control Panel/Network/Adapters
2. If an InstantWave adapter entry exists, remove it from the
list and exit the Control Panel/Network dialog box
3. Reboot the computer and re-install the adapter driver
The InstantWave adapter driver cannot be started and the adapter LEDs are not
flashing
• More than one driver is present in the Network setup folder
1.
Click Control Panel/Network/Adapters
2. If there is more than one entry for the same InstantWave
adapter, remove them all
3. Reboot Windows NT
4.
Reinstall the InstantWave adapter driver