User's Manual

InstantWave High Speed PCI/PC Card

step14. If the user needs to bind the adapter to TCP/IP, then the TCP/IP

protocols must be added

step15. The Network Settings Change dialog box will ask you to restart the

computer. Remove the floppy disk from the floppy drive and click Yes

to complete the installation

step16. Owing to Windows NT constraints, the InstantWave Windows Utility

Program will not be automatically installed. The user needs to install

this program by following the procedure described on page 16

Uninstalling the Adapter from Windows NT 4.0

step1. Click Start/Settings/Control Panel, and double-click the Network icon.

step2. Highlight the InstantWave adapter driver entry and click Remove

step3. Click Close. The system will ask you to restart the PC. Click Yes