Let’s build the Charlie Boucle Headboard 0 30 SEMBL Y A S M I N UT E 3 SKU 97101 Scan me! Inspiration Digital Instructions Free Lifetime Warranty 22-0217
Ok, let’s get rolling This should be easy, just follow our instructions and you will be back to Netflix in no time.
The goods A B 1 7 D C 2 3 4 5 8 IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
Step 1 Let’s get this thing fired up! Assemble the Left and Right Metal Rails (A)(B) using the Metal Connector (D). Secure with M6*12 mm Bolts (5). Remember to remove the 2 bolts in the Metal Connector (D) before assembling the rail. A A 5 5 D 5 D Please note: Part (A), (D), and (B) need to be on the same level before you secure them with the M6*12mm bolts (5).
Step 2 Using the Mounting Installation Template Unroll it Unroll paper Mounting Installation Template (7) and remove the adhesive backing. 7 Place it Locate where you would like to mount the headboard and apply Mounting Installation Template (7) to the wall in that location. Make sure the template and holes are level.
Step 2 Cont. Mark it Using the holes in the template and the metal rail as a guide, mark the location of each hole on the wall. These will become your guides as to where to drill the holes for the wall anchors. 7 Remove it 7 Slowly remove the paper, ensuring that all holes have been marked. Drill it Drill each hole with a 1/4” drill bit.
Step 3 2 2 Install Brackets (8) on the wall. First insert the Anchors (2), then mount the Brackets (E) with the M4*35 mm Screws (1) into the Anchors (2). See the graphic below for hole locations and bracket orientation. 2 2 8 8 1 8 1 1 1 1 2 8 1 Step 4 Attach the Brackets (8) to the back of the Headboards (C) with M4*14 mm Bolts (4). Repeat this process for both Headboard panels.
Step 5 Apply the EVA Pads (6) to the back of the Headboard panels.
Step 6 Mount the panel on the wall by matching the brackets on the back of the panel with the brackets that you just installed on the wall. Now it’s time for the Rail! First, insert the Anchors (2), then mount the Rail with M4*35 mm Screws (1) into the wall anchors.
Step 7 You made it to the last step! We knew you could do it. Now all that’s left to do is to flip the straps over the rail and tuck the end of the straps behind the headboard.
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up You Track package Replacement You We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
Safety first, fun later We want your Charlie Boucle Hanging Headboard to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months. For proper care and treatment of fabric & metal please check our website at NathanJames.com/products Safe use of this product starts with you. Do not modify the structure of this product in any way.
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free. Warranty This product comes with a lifetime warranty from the date of purchase.
