Use and Care Manual

Adler TV Stand

PROPER CARE AND TREATMENT

We want your TV stand to last as long as possible, so we recommend that you tighten screws

within the first two weeks after assembly. For added safety, check the tightness of all screws every

two months.

Wood:

Avoid cleaning MDF (Medium-density fibreboard) material with water. When necessary, clean the

surface with a slightly wet cloth and immediately dry thoroughly. For that hard to remove residue,

use a small amount of mild soap. Do not use bleach.

The wooden legs will also stay durable when you apply wood treatment oil when it starts to wear or

become dry. Treat only the base made of solid wood. Avoid the use of commercial waxes or

polishes, glass cleaners, or rough cleaning materials which may damage the finish.

Do not apply any wood treatment to the TV frame, shelves, and cabinet doors since these are

made of MDF.

Steel:

Wipe up spills as they happen with a damp cloth and wipe dry. Avoid abrasive cleaning solutions,

chemical solvents, strong detergents, cleaners with bleach, or furniture polish.

PAGE 1
Adler TV Stand PROPER CARE AND TREATMENT We want your TV stand to last as long as possible, so we recommend that you tighten screws within the first two weeks after assembly. For added safety, check the tightness of all screws every two months. Wood: Avoid cleaning MDF (Medium-density fibreboard) material with water. When necessary, clean the surface with a slightly wet cloth and immediately dry thoroughly. For that hard to remove residue, use a small amount of mild soap. Do not use bleach.