Use and Care Manual

12
And now for the final step! Time to install the tipping restraint
hardware. First, insert the Plastic Anchors (15) into the wall. Next,
attach the Plastic Bracket (14) to the Plastic Anchors (15) using the
M4*40mm Screws (16).
Next, attach the Plastic Bracket (14) to the cabinet using the
M3.5*15mm Screws (17). Finally, thread the Plastic Strap (18) through
the Plastic Brackets (14) to secure the cabinet to the wall.
Important Note: Young
children can be seriously
injured by tipping furniture.
You must install the tipping
restraint hardware (included)
with the unit to prevent the
unit from tipping, causing
any accidents or damage.
The tipping restraints are
intended only as a deterrent,
they are not substitute for
proper adult supervision.
The tipping restraints are not
earthquake restraints. If you
wish to add the extra security
of earthquake restraints,
they must be purchased and
installed separately.
Step 11
18
17
16
16
14
15
15
14
14
17
WALL
WALL WALL