Let’s build the Kova Cabinet 0 MINU 60 SEMBL Y A S TE 6 SKU 71303 Scan me! Inspiration Digital Instructions Free Lifetime Warranty 23-0228
Ok, let’s get rolling What’s included Description This should be easy, just follow our instructions and you will be back to Netflix in no time.
The goods A H H C G F E F B I L D K J K L IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
What’s included Description Qty 1 M6*30mm Cam Bolt 14 2 8*30mm Wooden Dowel 19 3 15*9.5mm Cam Lock 14 4 Hinge 4 5 Plastic Strip 1 6 Metal Connector 2 7 M6*30mm Wall Anchor 1 8 M4.2*32mm Screw 1 9 M4.2*17mm Screw 1 10 M4*14mm Screw 24 11 Handle 2 12 M4*20mm Bolt 2 13 M6*30mm Bolt 10 14 M4.
The goods 2 6 3 6 4 6 5 6 6 7 6 8 6 9 6 10 6 11 6 12 6 13 6 14 6 15 6 16 6 17 6 18 6 19 6 20 6 1 6 21 6 5
Step 1 Let’s get this thing fired up! Lay down packaging carton or use carpet as a working surface. We’re startin’ off easy. Secure the Hinges (4) and Metal Plates (21) to both sets of doors.
Step 2 How much wood would a woodchuck chuck If a woodchuck could chuck wood? It’s time to put in your wooden dowels (2)! Repeat this step with both of the Top Rails (H).
Step 3 Screw the Cam Bolts (1) and Magnetic Door Catcher (15) to the Top Panel (A). 1 1 1 1 1 A 6 1 16 16 1 15 1 Tip! Door Catcher can be adjusted from front to back for proper door alignment.
Step 4 Attach the other Magnetic Door Catcher (15) to the Bottom Panel (D).
Step 5 Secure the Cam Bolts (1) and Wooden Dowels (2) to the Left Side Panel (B).
Step 6 No, this isn’t Deja Vu! Repeat Step 5 with the Right Side Panel (C).
Step 7 Attach the Top Rails (H) and Bottom Back Rail (I) to Left Side Panel (B) using the Cam Locks (3). H 6 H 6 6I B 6 x3 6 Important Note: The cam lock must point toward the hole on the edge of the board.
Step 7 cont. Next, attach the Right Side Panel (C) to the Top Rails (H) and Bottom Rack Rail (I) using the Cam Locks (3).
Step 8 Using the Cam Bolts (A) again, secure the Top Panel to what you built from Step 7.
Step 9 First, unfold the Back Panel (G) then carefully slide it into place with the taped seam facing back. G 6 G 6 C 6 A 6 14 Step 10 14 14 Attach the Bottom Panel (D) as well as securing the Metal Connector (6) to Part H.
Step 11 Time to get the legs built! We take leg day very seriously around here. Using the provided Allen Key, tighten all pieces shown to 75%.
Step 12 Time to get those gorgeous legs onto the unit! You can tighten these bolts to 100%. Once tightened, twist on the Adjustable Levelers (18) to the corner of the legs.
Step 13 Carefully flip the unit over (grab a friend if you need help!) and twist on the Metal Supports (19) to where you want your shelf to rest.
Step 15 Let’s get those doors and handles on and then you’re two steps away from being done! We’re sorry to keep you from your Netflix series for so long.
Is your cabinet door looking crooked or unevenly spaced? Then you’ve come to the right place. Follow the illustrations below to get your cabinet door aligned and ready for action. If your door is too low or too high… Loosen the height screws, then move the door up or down to make it level. If the space between your doors is off… Loosen the side-to-side screws, then screw counter-clockwise to make the gap wider or clockwise to close any gaps.
Is your cabinet door looking crooked or unevenly spaced? (Cont.) If you’re still having trouble lining everything up, your next step should be to try to adjust the feet slightly to square up the cabinet & doors. Follow the illustrations below: If the right door appears to be hanging low, you can adjust the adjustable leveler on the front right until the door is better aligned.
Step 16 Wobbly or unlevel? Adjust feet until stable! 22
Step 17 Our favorite step! Because it’s the last step! Take your beautiful cabinet and secure it to the wall by looping the Plastic Strip (5) through the Metal Connector (6) and screwing it into the wall using the Wall Anchor (7).
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up You Track package Replacement You We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
Safety first, fun later We want your Kova Cabinet to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months. For proper care and treatment of wood and metal please check our website at NathanJames.com/products Safe use of this product starts with you. Do not modify the structure of this product in any way. Use this cabinet responsibly with the primary concern for your safety.
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free. Warranty This product comes with a lifetime warranty from the date of purchase.
