Instructions / Assembly

6
Step 1 (cont.)
Drywall application
Mark it
Chose your desired location on the wall then
use a pencil to mark where the anchors will go.
5/16” Drill bit
Following the marks you just made, with a
5/16” drill bit, drill 2 holes into the wall.
Insert the anchors
Go ahead and tap the wall anchors into place in the new
holes that you just drilled.
If you’re feeling strong, just go ahead and push it in.
Don’t forget Part 1
When inserting your screw into the wall anchor,
do not forget to use Part 1 between the screw
and the strap as this will help disguise the
hardware when installation is complete.