Use and Care Manual

5
Attach Metal Bracket
(7) to bottom of
Shelf (B) using the
M4*15mm Screws
(8) using screwdriver
as shown. If placing
the shelf on the
floor remove paper
backing from the
Footpads (9) and
adhere to bottom of
the Vertical Support
Frames (A).
Do NOT overtighten hardware.
Tighten only 75% for now.
Note: Only apply Footpads (9) on
the bottom of the shelf if you plan
to have this shelf sit on the floor.
Step 2
9
8
7
B
A
A