Let’s build the Theo Bookcase 0 MINU 60 SEMBL Y A S TE 6 SKU 66501 Scan me! Inspiration Digital Instructions Free Lifetime Warranty 22-0110
Ok, let’s get rolling This should be easy, just follow our instructions and you will be back to Netflix in no time.
The goods A B E C F I D G J H K 3 L
What’s included Description Qty 1 M6*15 mm Bolt 12 2 Knob 2 3 M6*30 mm Cam Bolt 4 4 M6*30 mm Cam Lock 4 5 M4*40 mm Screw 4 6 M4*20 mm Bolt 2 7 M4.2*32 mm Screw (for Non-drywall Anchor) 2 8 M6*30 mm Non-drywall Anchor 2 9 M6*30 mm Wooden Dowel 16 10 M4*14 mm Screw 16 11 Hinge 4 12 Allen Key 1 13 Metal Shelf Pin 4 14 Drywall Anchor 2 15 M4.
The goods 1 6 11 2 7 12 3 4 5 8 9 10 13 14 IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
Step 1 3 Let’s get this thing fired up! Screw the Cam Bolts (3) into the Top Panel (I). 3 3 I 3 Step 2 Now insert the Wooden Dowels (9) into the sides of the Left Back Side Panel (D), Left Front Side Panel (E), Right Back Side Panel (F), and Right Front Side Panel (G).
Step 3 Now let’s put those pieces together! Align the Left Side Panels (D)(E) and the Right Side Panels (F)(G) on top of the Top Panel (I). The Cam Bolts you inserted in the last step should align with the holes in the side panels. Use Cam Locks (4) to secure the panels in place. D E 4 4 4 F G 4 I Step 4 Slide the Back Panel (H) into the groove in the back of the cabinet. Next, attach the Bottom Panel (J) to the rest of the cabinet using M4*40 mm Screws (5).
Step 5 You’re halfway there! Screw both Bookcase Frame Supports (A) and Side Frame Base Supports (B) together using M6*15 mm Bolts (1). 1 A 1 X2 B Step 6 Line up the bookcase Shelves (C) and the Side Supports (A)(B) and screw together using M6*15 mm Bolts (1). Consider this your workout for the day.
Step 7 Grab a friend and have them help you lift the bookcase right side up! IMPORTANT TIP To prevent parts from breaking while placing the bookcase unit upright be sure to: 1) Have at least 2 people grab the bookcase on each side prior to lifting to an upright position. (Do not grab & move the bookcase by the top and bottom ends) 2) When rotating the bookcase to an upright position, try not to use the feet as a pivot point to avoid applying stress on the components.
Step 8 Ok, we will admit this is our least favorite step also. At one point, you may find this step tricky but it’s worth the 20 second meltdown—because everything will look SO clean at the end…you’ll forget all about the assembly! 14 15 With that being said, it’s time to attach this baby to the wall! We’ll be using screws and anchors to secure it. See the following pages for detailed instructions on how to do this. 8 7 14 15 8 7 8 7 14 15 Please note... Part 7 & 8 are for non-drywall applications.
Step 8 (cont.) Non-drywall application Mark it Chose your desired location on the wall, have your friend hold the bookcase in place and use a pencil to mark where the anchors will go. 1/4” Drill bit Move bookcase to the side and following the marks you just made, with a 1/4” drill bit, drill 2 holes into the wall. Insert the anchors Go ahead and tap the wall anchors into place in the new holes that you just drilled. If you’re feeling strong, just go ahead and push it in.
Step 8 (cont.) Drywall application Mark it Chose your desired location on the wall, have your friend hold the bookcase in place and use a pencil to mark where the anchors will go. 5/16” Drill bit Move bookcase to the side and following the marks you just made, with a 5/16” drill bit, drill 2 holes into the wall. Insert the anchors Go ahead and tap the wall anchors into place in the new holes that you just drilled. If you’re feeling strong, just go ahead and push it in.
Step 8 (cont.) How to use drywall anchors 1. Drill hole with 5/16” bit 2. Pinch and insert 3. Begin tightening 4.
Step 9 If you’re feeling faint, now’s the perfect time to grab a La Croix or drink of choice to get you through these last two steps. Attach the Hinges (11) to the Doors (L) with M4*14 mm Screws (10). Do this for both Doors (L). Next, insert the Metal Shelf Pins (13) into the cabinet at your desired height, then slide the Cabinet Shelf (K) into place.
Step 10 Attach the Doors (L) to the base of the cabinet by securing the Hinges (11) with M4*14 mm Screws (10). Finally, attach the Knobs (2) to the doors using M4*20 mm Bolts (6). This calls for pizza! You deserve it.
Is your cabinet door looking crooked or unevenly spaced? Then you’ve come to the right place. Follow the illustrations below to get your cabinet door aligned and ready for action. If your door is too low or too high… Loosen the height screws, then move the door up or down to make it level. If the space between your doors is off… Loosen the side-to-side screws, then screw counter-clockwise to make the gap wider or clockwise to close any gaps.
Tip from one friend to another: If you want to adjust the height of the shelf position, remove all metal pins on either side and then install the metal pins after you adjust the height of the shelf.
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up You Track package Replacement You We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
Safety first, fun later We want your Theo Bookcase with Storage Cabinet to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months. For proper care and treatment of wood and metal please check our website at NathanJames.com/products Safe use of this product starts with you. Do not modify the structure of this product in any way. Use this bookcase responsibly with the primary concern for your safety.
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free. Warranty This product comes with a lifetime warranty from the date of purchase.
