Instructions / Assembly

Mark it

1/4 Drill bit

Phillips

screwdriver

All about the angle

Chose your desired location on the wall,

have your friend hold the bookcase in place and

use a pencil to mark where the anchor will go.

Move bookcase to the side and following the mark you

just made. With a 1/4 drill bit, drill 2 holes into the wall.

Following the mark you just made. Using your Phillips

head screw driver, screw the plastic anchors into the

holes until they are ush to the wall.

If you’re feeling strong, just go ahead and push it in.

Insert 1 screw through each metal bracket and

into the drywall anchor. Tilt your Phillips head

screwdriver, and secure but do not over tighten.