Instructions / Assembly

8
Mark it
Chose your desired location on the wall,
have your friend hold the bookcase in place and
use a pencil to mark where the anchor will go.
1/4” Drill bit
Move bookcase to the side and following the mark you
just made. With a 1/4” drill bit, drill 2 holes into the wall.
Phillips screwdriver
Following the mark you just made. Using your phillips
head screw driver, screw the plastic anchors into the
holes until they are flush to the wall.
If you’re feeling strong, just go ahead and push it in.
4
All about the angle
Insert 1 screw through each metal bracket and
into the drywall anchor. Tilt your phillips head
screwdriver, and secure but do not over tighten.
4
2