Instructions / Assembly

Step 3 (cont.)

Drywall application

Mark it

Chose your desired location on the wall,

have your friend hold the bookcase in place and

use a pencil to mark where the anchor will go.

5/16” Drill bit

Move bookcase to the side and following the marks you just

made, with a 5/16” drill bit, drill 2 holes into the wall.

All about the angle

Insert 1 screw through each metal bracket and

into the drywall anchor. Tilt your phillips head

screwdriver, and secure but do not over tighten.

Insert the anchors

Go ahead and tap the wall anchors into place in the new

holes that you just drilled.

If you’re feeling strong, just go ahead and push it in.