Use and Care Manual

8
Now insert the Wooden Dowels (7) into the side of the Cabinet Back Panel
(D). Slide the Small Side Panel (C) into place by lining up the holes with
the Wooden Dowels and Cam Bolts you already inserted into the Cabinet
Back Panel (D). Secure in place using the Cam Locks (11).
Next, insert the 1/4” x 12mm Barrel Nuts (5) into the Large Side Panel (B) and Small Side Panel (C).
Then insert the Wooden Dowels (7) into the Cabinet Bottom Panel (E) and attach to the rest of the
cabinet you’ve built by aligning the Wooden Dowels with the holes in the side of the cabinet. Secure
in place using the 1/4” x 2” Hex Button Head Bolts (2). Don’t forget to use the ⁄” x ⁄” Flat Washers (4)
and ⁄” x ⁄” Spring Washers (3).
Step 3
Step 4
x2
7
11
C
C
B
B
D
E
5
7
E
4
3
2
x4