Let’s build the Aaron Desk 0 MINU 60 SEMBL Y A S TE 6 SKU 56001 Scan me! Free Lifetime Warranty 23-0414
Ok, let’s get rolling This should be easy, just follow our instructions and you will be back to Netflix in no time.
The goods A D B F E H C H G I G IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping.
What’s included Description Qty 1 1/4” x 1 1/8” Hex Button Head Bolt 6 2 1/4” x 2” Hex Button Head Bolt 4 3 1/4” x 3/8” Spring Washer 10 4 1/4” x 1/2” Flat Washer 10 5 1/4” x 12mm Barrel Nut 4 6 Allen Key 1 7 8*20mm Wooden Dowel 12 8 Knob 2 9 5/32” x 3/4” Knob Bolt 2 10 Cam Bolt 4 11 Cam Lock 4 12 Hinge 2 13 M3 x 15mm Screw 12 14 Shelf Pin 4 15 Plastic Nail-in Foot (extra) 4 16 Plastic Bracket (for anti-tip) 2 17 Non-Drywall Wall Anchor (for anti-tip) 2 1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 5
Step 1 Alright, let’s get started! Start off by inserting the Cam Bolts (10) into the holes indicated below in the Large Side Panel (B), Small Side Panel (C) and Cabinet Bottom Panel (E). Tighten using a Phillips head screwdriver (not included). B x8 10 E C Step 2 Next, insert the Wooden Dowels (7) into the holes indicated below in the Large Side Panel (B). Align the holes in the side of the Cabinet Back Panel (D) with the Cam Bolts and Dowels you inserted in the Large Side Panel (B).
How to use cam locks Did you know? Cam locks are used to join two panels together, usually the edge of one to the flat side of another. First, your cam bolt (or cam pin) will need to be properly inserted into the flat side of the board. Important Note: Only tighten the cam bolt until it is secure. Do not over-tighten. Next, you will fit the proper hole on the edge of the associated joining panel over the cam bolt.
Step 3 Now insert the Wooden Dowels (7) into the side of the Cabinet Back Panel (D). Slide the Small Side Panel (C) into place by lining up the holes with the Wooden Dowels and Cam Bolts you already inserted into the Cabinet Back Panel (D). Secure in place using the Cam Locks (11). x2 7 C 11 B D Step 4 Next, insert the 1/4” x 12mm Barrel Nuts (5) into the Large Side Panel (B) and Small Side Panel (C).
Step 5 Now it’s time to attach the cabinet you’ve been building to the Desktop Subassembly (A) using the Wooden Dowels (7). Secure in place using the 1/4” x 1 1/8” Hex Button Head Bolts (1). Don’t forget to use the 1/4” x 1/2” Flat Washers (4) and 1/4” x 3/8” Spring Washers (3).
Step 6 You’re halfway there and doing great! Now it’s time to attach the legs. Attach the Short Legs (G) and Long Legs (H) by twisting into place.
Step 7 Now insert the Shelf Pins (14) into the cabinet at your desired height. x4 14 Step 8 Next, slide the Adjustable Shelf (F) into the cabinet on top of the Shelf Pins you inserted in Step 7.
Step 9 13 Almost done! Let’s get the hinges installed now. To do this, place the Hinges (12) in the Door (I) and secure in place using the M3 x 15mm Screws (13). 13 12 x2 I Step 10 Next, attach the Door (I) to the desk by securing the Hinges in place using the M3 x 15mm Screw (13).
Step 11 Attach the Knobs (8) to the desk using the 5/32” x 3/4” Knob Bolts (9). 9 8 x2 Step 12 Finally, secure your new desk to the wall to prevent tipping. Secure the Plastic Brackets (16)to your wall and the desk using the appropriate screws listed below. For drywall, use the Drywall Wall Anchors (21). For non-drywall, use the Non-Drywall Wall Anchors (17). 16 16 21 19 17 17 18 18 16 20 20 21 IMPORTANT NOTE Non-Drywall requires Non-Drywall Anchor (17). Drill holes using 1/4” drill bit.
How to use drywall anchors 1. Drill hole with 5/16” bit 3. Begin tightening 2. Pinch and insert 4. A nchor is secure when screw is tightened to 100%.
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up You Track package Replacement You We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
Safety first, fun later We want your product to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months. For proper care and treatment, please check our website at NathanJames.com/products Safe use of this product starts with you. Do not modify the structure of this product in any way. Use this product responsibly with the primary concern for your safety.
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free. Warranty This product comes with a lifetime warranty from the date of purchase.
