Use and Care Manual
12
Safety first! Let’s finish securing your console
table to the wall. Mark two attachment points
with a pencil at the appropriate height on the
wall where the other Plastic Bracket (8) will
rest. Drill two pilot holes into the wall where you
marked with a pencil and push the Wall Anchors
(9) in. Secure the Plastic Bracket (8) to the wall
over the Wall Anchors (9) with the M4*38MM
Screws (10). Tether to the wall, as shown below.
Step 9
12
8
10
10
8
8
9
9
And that’s it, you’ve got a new console table! The
perfect spot to put that pizza you’ll be ordering
any minute now...
Tether to the wall.