Let’s build the Jenny Side Table 0 MINU 60 SEMBL Y A S TE 6 SKU 34505 Scan me! Inspiration Digital Instructions Free Lifetime Warranty 22-0111
Ok, let’s get rolling What’s included Description This should be easy, just follow our instructions and you will be back to Netflix in no time.
The goods A D B E J C F G L M H N P IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
What’s included Description Qty 1 M6*15 mm Bolt 4 2 Cam Bolt 8 3 Cam Lock 8 4 Wooden Dowel 16 5 Handle 1 6 M4.2*40 mm Screw 8 7 M4*23 mm Bolt 2 8 M3.5*12 mm Screw 12 9 M4.2*32 mm Screw for Non-drywall Anchor 2 10 M4.
The goods 1 2 8 9 left drawer runner 3 10 4 5 11 12 right drawer runner left cabinet rail 15 5 6 13 7 14 right cabinet rail
Step 1 Let’s get this thing fired up! We’ll start with the Cam Locks (2) and Wooden Dowels (4). Insert the Wooden Dowels (4) into the sides of the Left Side Panels (D)(E) and Right Side Panels (F)(G). Screw the Cam Bolts (2) into the Top Panel (A) and Drawer Front Panel (M). 4 2 4 2 D 4 4 4 2 2 4 E A 2 4 4 4 2 F 4 4 2 4 2 M 4 4 4 G 4 D Step 2 Now let’s put those pieces together! Align the Left Side Panels (D)(E) and the Right Side Panels (F)(G) on top of the Top Panel (A).
Step 3 Now it’s time to assemble the Cabinet Rails (15). We’ll be using the rails labeled CL and CR. Attach the CL rail using M3.5*12 mm Screws (8). Be sure that the wheel of the rail is facing the front of the cabinet. Repeat this process for the CR rail, again ensuring the wheel of the rail is facing the front of the cabinet. Front Back 15 Back 8 8 8 Front Next, slide the Back Panel (H) into the groove in the back of the cabinet.
6 Step 4 6 Attach the Bottom Panel (B) to the cabinet you built in the previous steps with M4.2*40 mm Screws (6). 6 6 B 6 Step 5 6 You’re doing great! Now it’s time to start on the drawer. Attach the Left Drawer Side Panel (N) and the Right Drawer Side Panel (O) to the Drawer Back Panel (L) using M4.2*40 mm Screws (6).
Step 6 Slide the Drawer Bottom Panel (J) into the drawer base you created in the last step. J Step 7 Time to finish up this drawer. Attach the Handle (5) to the Drawer Front Panel (M) with M4*23 mm Bolts (7). Next, attach the Drawer Front Panel (M) and lock into place with Cam Locks (3).
Step 8 Time to attach the Drawer Runners (15). We’ll be attaching the runners labeled DL and DR. Attach DL underneath the drawer on the left side with M3.5*12 mm Screws (8). Be sure the wheel of the rail is facing the back of the drawer. Repeat this process with the right side rail labeled DR. 8 8 8 8 8 8 8 8 left drawer runner 15 Step 9 You’re almost done! Now would be a good time to order a pizza to enjoy with your new side table.
Step 10 Slide the completed drawer into the cabinet. Cabinet Slide Drawer Slide Step 11 13 Attach Plastic Pads (13) to each corner of the back of the drawer.
Step 12 You made it to the last step! We’re so proud of you. Time to attach this baby to the wall! We’ll be using screws and anchors to secure it. See the following pages for detailed instructions on how to do this. 12 10 11 12 10 11 9 11 12 9 9 10 Please note… Parts 9 & 11 are for non-drywall applications. Parts 10 & 12 are for drywall applications. See following pages for more detailed instructions.
Step 12 (cont.) Non-drywall application Mark it Chose your desired location on the wall, have your friend hold the table in place and use a pencil to mark where the anchors will go. 1/4” Drill bit Move the table to the side and following the marks you just made, with a 1/4” drill bit, drill 2 holes into the wall. Insert the anchors Go ahead and tap the wall anchors into place in the new holes that you just drilled. If you’re feeling strong, just go ahead and push it in.
Step 12 (cont.) Drywall application Mark it Chose your desired location on the wall, have your friend hold the table in place and use a pencil to mark where the anchors will go. 5/16” Drill bit Move the table to the side and following the marks you just made, with a 5/16” drill bit, drill 2 holes into the wall. Insert the anchors Go ahead and tap the wall anchors into place in the new holes that you just drilled. If you’re feeling strong, just go ahead and push it in.
Step 12 (cont.) How to use drywall anchors 1. Drill hole with 5/16” bit 3. Begin tightening 2. Pinch and insert 4.
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up You Track package Replacement You We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
Safety first, fun later We want your Jenny Side Table to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months. For proper care and treatment of fabric & metal please check our website at NathanJames.com/products Safe use of this product starts with you. Do not modify the structure of this product in any way. Use this side table responsibly with the primary concern for your safety.
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free. Warranty This product comes with a lifetime warranty from the date of purchase.
