Use and Care Manual

PROPER CARE AND TREATMENT - COFFEE TABLE
We want your coffee table to last as long as possible, so we recommend that you
tighten screws within the first two weeks after assembly. For added safety, check
the tightness of all screws every two months.
Marble Laminate Board:
Clean the laminate with a non-abrasive sponge or towel. Wet your sponge and
spread it over the laminate then allow to soak before scrubbing. You can also spray
on a cleaning solution as an alternative. Always rinse the surface with water to
remove residue. Use a soft towel to dry.
Tempered Glass:
When necessary clean glass surfaces with a crumpled newspaper to clean and leave
a lint-free finish if your towels aren't getting the job done. On a regular basis to
eliminate dust and fingerprints to reduce a smudgy appearance treat them with the
most budget-friendly option: mix one part white vinegar with two parts water and
apply directly to the glass, then wipe with a newspaper to prevent lint on the glass.
For commercial options, look for light aerosol foam cleaners – these should leave
your glass sparkling with a simple spray and wipe.
Metal Legs:
Wipe up spills as they happen with a damp cloth and wipe dry. Avoid abrasive
cleaning solutions, chemical solvents, strong detergents, cleaners with bleach, or
furniture polish.