Use and Care Manual

Time to work on the door!

First, install the Metal Pin Hinges (G) onto the Door (7) using the M3*14mm Screws

(H). Then install the Magnetic Plate (E) with the M3*12mm Screw (F).

Finally, install the Handle (I) onto the Door (7) using the M4*16mm Bolt (M).

Step 5

Insert the Wood Dowels (C) into

the ends of the Left Side Panel

(4) and Right Side Panel (5).

Prior to putting the Bottom

Panel (3) into place, line up the

Metal Pin Hinges (G) on the

Door (7) with the holes on the

Shelf (2) and Bottom Panel (3).

Then secure the Bottom Panel

(3) with the Wood Screws (D).

Step 6