Use and Care Manual
10
Don’t be too eager…wait to fully tighten.
Loosely attach the Metal Stretcher (8) to the Metal
Side Frames (9) using two ⁄*28 mm Bolts (J).
Step 7
Just a few more steps!
First, position the base in place. By
hand, fasten all six ⁄*28 mm Bolts
(J) into their respective holes.
Once things are aligned, tighten
all of the bolts using the Allen Key
(K), including those from Step 6.
Step 8
J
J
K
J