Let’s build the Mina Side Table 0 MINU 40 SEMBL Y A S TE 4 SKU 33201 Scan me! Free Lifetime Warranty 23-1229-VN
Ok, let’s get rolling This should be easy, just follow our instructions and you will be back to Netflix in no time.
The goods IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
What’s included Description The goods Qty A M6*35 mm Cam Bolt 8 B 15*9.
Step 1 Let’s get this thing fired up! (See following page for how to use cam locks) Insert the Wood Dowels (C) and Cam Bolts (A) into the Left Side Panel (4). Then secure the Shelf (2) to the Left Side Panel (4) using the Cam Locks (B). While we’re at it, secure the Magnetic Door Catch (E) to the Shelf (2) using two (H) Screws. Step 2 Repeat the same steps to secure the Right Side Panel (5) to the Shelf (2).
How to use cam locks Did you know? Cam locks are used to join two panels together, usually the edge of one to the flat side of another. First, your cam bolt (or cam pin) will need to be properly inserted into the flat side of the board. Important Note: O nly tighten the cam bolt until it is secure. Do not over-tighten. Next, you will fit the proper hole on the edge of the associated joining panel over the cam bolt.
Step 3 Now insert the Wood Dowels (C) and Cam Bolts into the Top Panel (1). Then secure everything from Step 2 to the Top Panel (1) with Cam Locks (B). Step 4 Slide in the Back Panel (6).
Step 5 Time to work on the door! First, install the Metal Pin Hinges (G) onto the Door (7) using the M3*14mm Screws (H). Then install the Magnetic Plate (E) with the M3*12mm Screw (F). Finally, install the Handle (I) onto the Door (7) using the M4*16mm Bolt (L).
Step 6 Insert the Wood Dowels (C) into the ends of the Left Side Panel (4) and Right Side Panel (5). Prior to putting the Bottom Panel (3) into place, line up the Metal Pin Hinges (G) on the Door (7) with the holes on the Shelf (2) and Bottom Panel (3). Then secure the Bottom Panel (3) with the Wood Screws (D).
Step 7 Don’t be too eager…wait to fully tighten. Loosely attach the Metal Stretcher (8) to the Metal Side Frames (9) using two 1/4*28 mm Bolts (J). J J Step 8 K Just a few more steps! First, position the base in place. By hand, fasten all six 1/4*28 mm Bolts (J) into their respective holes. J Once things are aligned, tighten all of the bolts using the Allen Key (K), including those from Step 6.
Step 9 Cover the visible Cam Locks using the PVC Stickers (M).
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up You Track package Replacement You We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
Safety first, fun later We want your Mina Side Table to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months. For proper care and treatment of wood & metal please check our website at NathanJames.com/products Safe use of this product starts with you. Do not modify the structure of this product in any way. Use this Mina Side Table responsibly with the primary concern for your safety.
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free. Warranty This product comes with a lifetime warranty from the date of purchase.
