Use and Care Manual
5
Now take a moment to match
the sticker on the bottom of
the Chair Back (B) with the
sticker on the corner block.
Attach the Chair Back (B)
to the Frame Seat (C) using
the ¼ x 2 ⅜ inch Hex Button
Head Bolts (1). First place the
¼ inch Flat Washer (3), then
the ¼ inch Lock Washer (2),
then the ¼ x 2 ⅜ inch Hex
Button Head Bolt (1). Tighten
using the Allen Key (4).
Do NOT overtighten hardware.
Tighten only to 75% for now.
Step 2
75%
B
5
1
2
3
C