Use and Care Manual

5
Next up, take the
assembled frame from
step one and place it
on top of the Seat (C).
Insert the M6*45MM Bolt
(1) through the Spring
Washer (5) and Washer
(4).
Align the holes on the
frame and components.
Use the Large Allen key
(6) to partially tighten
the bolt by turning it
clockwise.
Align the holes on the seat
(C) with the four holes on the
frame. Take the M6*20MM
Bolt (1) and pass it through the
Spring Washer (5) and Washer
(4).
Make sure the holes on the
frame and components are
perfectly aligned. Grab the
trusty Large Allen key (6) and
give it a clockwise twist to
partially tighten the bolts.
Step 2
Step 3
C
6
1
4
5
6
C
3
4
5