Use and Care Manual

4
Let’s get this thing fired up! Please
take a moment to match the sticker
on the bottom of the chair back
with the sticker on the corner block.
Once aligned, attach the Seat
Cushion (B) to the Chair Back (A).
Secure by placing a ¼ inch Flat
Washer (5) down first, then a ¼ inch
Lock Washer (4), followed by a ¼ x
1½ inch Hex Button Head Bolt (1).
Tighten using the Allen Key (7).
Step 1
Do NOT overtighten hardware.
A B
7
1
4
5