Use and Care Manual

14
Install your light bulbs (not
included) and then adjust your
shade and bulb assemblies to
your desired orientation.
Step 10
Bulb(not included)
Problem
The bulb will not light.
The fuse blows or circuit
breaker blows when the light
is turned on.
Possible Causes
The bulb is burned out.
The power is o.
The circuit breaker is o.
There is an exposed wire.
Solutions
Replace the light bulb.
Ensure the power supply is on.
Ensure the circuit breaker is in the ON position.
Discontinue use of the light.
Contact a qualified electrician or reach out to
our Customer Happiness team at
[e-mail] or 1-866-619-1004.
Troubleshooting
Suggested Bulb: ST19 LED 60 Watt Equivalent
E26 Medium Base | Dimmable
Fixture Max Wattage: 240W (60W per bulb)
270°