Let’s build the Violet Track Light 5 MINU 45 SEMBL Y A S TE 4 SKU 17203 Scan me! Free Lifetime Warranty 23-0404
Ok, let’s get rolling This should be easy, just follow our instructions and you will be back to Netflix in no time.
Safety first, fun later Safe use of this product starts with you. Do not modify the structure of this product in any way. Use this light fixture responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use. Our products have been tested to meet specific safety measures as they were originally intended to be sold.
The goods 1 A 2 4 3 B 5 C 6 D IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
Pre-Installation • Read all instructions prior to beginning assembly. • To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. • Keep the receipt and these instructions for proof of purchase. • Suggested Bulb: ST19 Vintage LED 60 Watt Equivalent | E26 Medium Base | Dimmable • Fixture Max Wattage: 240W (60W per bulb) Step 1 It’s as easy as it looks! Remove the screws from the non-fixed arm of the Fixture (1).
Step 2 Secure the non-fixed arm into the Fixture (1) by first sliding it into place and then using the screws that you removed in Step 1 to tighten.
Step 3 4" 6" 10" 12" 16" 18" 22" ⑤ ① ① ⑥ 2 ④ ⑥ ④ ① Decide your necessary fixture stem length to achieve your desired fixture height. Then, pass the cord through each of the necessary stem components for your desired fixture height. ① ② ① ② E ⑤ ⑥ ⑤ ① ② E ④ ① ② E ④ 34" 5 E ⑥ ⑥ E ⑤ ⑥ Helpful Tip: Braiding the cord first then rotating the tubes while passing the cord through will make things go a little more smoothly.
Step 3 cont. Thread the necessary stem components together to complete the connection between the Canopy (6) and the Fixture (1).
Step 4 Remove the Finial Nuts (C) from the Mounting Bracket (B). B C C Step 5 Mount the Mounting Bracket (B) onto your existing Electrical Box. B Note: Be sure that you are only making the connections to a 120V AC 60Hz circuit. If you do not have a pre-existing electrical box, we strongly advise using a certified electrician.
Step 6 You can adjust the orientation in which your fixture will face by using the adjustment screw in the middle of the Mounting Bracket (B). First, slightly loosen the adjustment screw, then rotate the Mounting Bracket (B) to have the threaded posts oriented in your desired direction before re-tightening the adjustment screw to re-secure the Mounting Bracket (B) in place.
Step 7 Wrap the Ground Wire from the Fixture (1) around the grounding screw on the Mounting Bracket (B) & then secured by tightening the screw. Use a Wire Nut (D) to join the ground wire from the Fixture (1) with the ground wire from the Electrical Box.
Step 8 Use Wire Nuts to join the remaining matching colored wires (White to White, Black to Black). Once complete, tuck the excess wire into the Electrical Box.
Step 9 Secure the fixture to the Mounting Bracket (B) on your pre-installed Electrical Box using the Finial Nuts (C) that you originally removed in Step 4. To properly fasten the Finial Nuts (C), thread the posts in or out to adjust for proper threading length.
Step 10 Install your light bulbs (not included) and then adjust your shade and bulb assemblies to your desired orientation. Suggested Bulb: ST19 LED 60 Watt Equivalent E26 Medium Base | Dimmable Fixture Max Wattage: 240W (60W per bulb) Bulb(not included) 270° Troubleshooting Problem Possible Causes Solutions The bulb will not light. The bulb is burned out. Replace the light bulb. The power is off. Ensure the power supply is on. The circuit breaker is off.
Questions? Don’t worry, we’ve got the answers What other light bulbs can fit in this light? Is this light compatible outside North America? The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit. Our lighting is only warranted in Canada and the United States.
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up You Track package Replacement You We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help We do our best to ensure your product arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free. Warranty This product comes with a lifetime warranty from the date of purchase.
