Use and Care Manual

10
You made it to the last step!
We’re so proud of you. Now
would be a great time to
order a celebratory pizza
(or two, you deserve it).
For this last step, all that’s
left to do is insert the bulb.
We recommend one Type
A19 bulb with a maximum
wattage of 60 (not included).
120V 60Hz AC Only
Step 11
Problem
The bulb will not light.
The fuse blows or circuit
breaker blows when the light
is turned on.
Possible Causes
The bulb is burned out.
The power is o.
The circuit breaker is o.
There is an exposed wire.
Solutions
Replace the light bulb.
Ensure the power supply is on.
Ensure the circuit breaker is in the ON position.
Discontinue use of the light.
Contact a qualified electrician or reach out to
our Customer Happiness team at
[e-mail] or 1-866-619-1004.
Troubleshooting