Let’s build the Ferris Wall Fixture 15 SEMBL Y A S M IN UT E 15 SKU 14202 Scan me! Inspiration Digital Instructions Free Lifetime Warranty 22-0527
Ok, let’s get rolling This should be easy, just follow our instructions and you will be back to Netflix in no time.
Safety first, fun later Safe use of this product starts with you. Do not modify the structure of this product in any way. Use this light fixture responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use. Our products have been tested to meet specific safety measures as they were originally intended to be sold.
The goods 1 A B C D IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
Pre-Installation • Read all instructions prior to beginning assembly. • To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. • Keep the receipt and these instructions for proof of purchase. • Use 2 Type T Bulbs or Type B bulbs (not included). • 120V 60Hz AC Only Step 1 Separate Mounting Plate (B) from Fixture by removing Screws (D) from the side of the back plate.
Step 2 Install the Mounting Plate (B) to your pre-existing Electrical Box. B Note: Be sure that you are only making the connections to a 120V AC 60Hz circuit. If you do not have a pre-existing electrical box, we strongly advise using a certified electrician. Step 3 A Electrical box Electrical box Wrap the ground wire from the fixture around the grounding screw on the Mounting Bracket (B). B P.S. We aren’t judging you if you’ve already pulled out your snack. Ours was eaten by Step 2.
Step 4 Join matching colored wires with Wire Nuts. Black (Hot) E Begin tucking the excess wire into the electrical box. Ground White (Neutral) Step 5 Using the Screws, mount the Fixture (1) to the Mounting Bracket (B). Be sure that you have all of the excess wire tucked into the electrical box.
Step 6 Last, but not least, screw in two bulbs (not included). We recommend B-10 bulbs. Let there be light! Troubleshooting Problem Possible Causes Solutions The bulb will not light. The bulb is burned out. Replace the light bulb. The power is off. Ensure the power supply is on. The circuit breaker is off. Ensure the circuit breaker is in the ON position. There is an exposed wire. Discontinue use of the light.
Questions? Don’t worry, we’ve got the answers What other light bulbs can fit in this light? Is this light compatible outside North America? The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit. Our lighting is only warranted in Canada and the United States.
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up You Track package Replacement You We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free. Warranty This product comes with a lifetime warranty from the date of purchase.
