Instructions / Assembly
13
Now all that’s left is to install your
light bulbs! We suggest using 3
Type G25 bulbs with a maximum
wattage of 60W per bulb.
Let there be light!
Step 9
Problem
The bulb will not light.
The fuse blows or circuit
breaker blows when the light
is turned on.
Possible Causes
The bulb is burned out.
The power is o.
The circuit breaker is o.
There is an exposed wire.
Solutions
Replace the light bulb.
Ensure the power supply is on.
Ensure the circuit breaker is in the ON position.
Discontinue use of the light.
Contact a qualified electrician or reach out to
our Customer Happiness team at
help@nathanjames.com or 1-866-619-1004.
Troubleshooting
Use 3 Type G25 LED 60 watt
equivalent bulbs (not included)
120V 60HZ only