Use and Care Manual

7
Remove the M4*15mm Bolts (E)
from the Mounting Plate (C).
Now would be a good time to
order a celebratory pizza to
enjoy once installation is done.
#treatyourself
Using the M4*26mm Screws (A), secure
the Mounting Plate (C) to the pre-
installed electrical box in your wall.
Helpful Tip: Be sure
that the flanges on the
top and bottom of the
Mounting Plate (C)
are aligned vertically.
Electrical Box
Step 4
Step 5
C
E
E
C
C
A
A
Note: Be sure that you are only
making the connections to a 120V
AC 60Hz circuit. If you do not
have a pre-existing electrical
box, we strongly advise using a
certified electrician.