Let’s build the Pattinson Vanity Light 0 30 SEMBL Y A S M I N UT E 3 SKU 13122 Scan me! Inspiration Digital Instructions Free Lifetime Warranty 22-1005
Ok, let’s get rolling This should be easy, just follow our instructions and you will be back to Netflix in no time.
Safety first, fun later Safe use of this product starts with you. Do not modify the structure of this product in any way. Use this light fixture responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use. Our products have been tested to meet specific safety measures as they were originally intended to be sold.
The goods 1 A 2 B 3 C D IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
Pre-Installation • Read all instructions prior to beginning assembly. • To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. • Keep the receipt and these instructions for proof of purchase. • Use 3 G80-type bulbs up to 180 watts (60W per bulb) or CFL or LED equivalent (not included). 120V 60Hz AC only. Step 1 It’s as easy as it looks! Thread the horizontal support tubes onto the Fixture (2).
Step 3 Guide the wires from the Fixture (2) through the back of the Wall Plate (1). Then, secure the Wall Plate (1) and Fixture (2) together using the hardware components you removed in Step 2.
Step 4 E Remove the M4*15mm Bolts (E) from the Mounting Plate (C). Now would be a good time to order a celebratory pizza to enjoy once installation is done. #treatyourself C E Electrical Box C Step 5 Using the M4*26mm Screws (A), secure the Mounting Plate (C) to the preinstalled electrical box in your wall. A A Note: Be sure that you are only making the connections to a 120V AC 60Hz circuit. If you do not have a pre-existing electrical box, we strongly advise using a certified electrician.
Step 6 Wrap the ground wire from the Wall Plate (1) around the grounding screw on the Mounting Plate (C). Secure by tightening the screw.
Step 7 Use the Wire Nuts (B) to connect the matching colored wires (White to White, Black to Black and Ground to Ground). Once complete, tuck the excess wire into the electrical box. Black (Hot) B B B Ground Wire White (Neutral) Step 8 C E Secure the Fixture (2) to the Mounting Plate (C) on your pre-installed electrical box using the M4*15mm Screws (E).
Step 9 Only a few more steps to go! To celebrate, we made this step really easy for you. Remove the shade collars from the bottom of each socket by unscrewing them. Step 10 Install the Shades (3) onto the sockets by screwing the shade collars back into place.
Step 11 You made it to the last step! Now install the bulbs. We recommend using 3 Type G80 bulbs (not included). Look at that, you’re done! Time to enjoy that pizza. Troubleshooting Problem Possible Causes Solutions The bulb will not light. The bulb is burned out. Replace the light bulb. The power is off. Ensure the power supply is on. The circuit breaker is off. Ensure the circuit breaker is in the ON position. There is an exposed wire. Discontinue use of the light.
Questions? Don’t worry, we’ve got the answers What other light bulbs can fit in this light? Is this light compatible outside North America? The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit. Our lighting is only warranted in Canada and the United States.
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up You Track package Replacement You We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help We do our best to ensure your light fixture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free. Warranty This product comes with a lifetime warranty from the date of purchase.
